Deploy Efficiency Driven k-Barrier Construction Scheme Based on Target Circle in Directional Sensor Network

Journal of Computer Science and Technology - With the increasing demand for security, building strong barrier coverage in directional sensor networks is important for effectively detecting...     

Structural and physicochemical properties of silver-rich Ag–Al alloys

The X-ray diffraction, Scanning Electron Microscopy, Differential Scanning Calorimetry, dilatometric and electrical conductivity measurements were used to study the structural and physicochemical properties of selected silver-rich alloys from Ag–Al system. All the studied alloys, containing from 10 to 37 at. % of Al (Ag₉₀Al₁₀, Ag₈₅Al₁₅, Ag₇₇Al₂₃, Ag₇₅Al₂₅, Ag₇₂Al₂₈, Ag₇₀Al₃₀, Ag₆₃Al₃₇), were prepared from high purity metals by melting in a glove-box filled with a high purity argon atmosphere. The obtained X-ray diffraction patterns and microstructure observation of alloys containing up to 15 at. % of Al suggested that in this range only solid solution of silver exists. The thermal analysis showed heat effects related to phase transitions in Ag–Al system. In addition, the thermal expansion studies revealed an anomalous behavior in expansion for some composition of alloys associated with the phase transition. The electrical conductivity values rapidly changed, which may be associated with the formation of different phase areas in the Ag–Al system.Based on the results obtained in this work and critically reviewed literature data a thermodynamic re-optimization of the binary Ag–Al system using CALPHAD method was proposed. A good agreement between calculation and experiment was found.     

金沙江上游水电站应对白格堰塞湖灾害的措施及经验

2018年10月、11月,西藏自治区昌都市江达县白格村两次发生山体滑坡造成金沙江断流并形成白格堰塞湖,给金沙江上游沿岸人民生产生活设施造成巨大安全威胁和超过百亿元的经济损失。华电金沙江上游水电开发有限公司组织所属企业及参建单位快速应对,采取撤离避让、工程防护、人工干预、生产恢复,推动后续处置、风险评估等措施,最大限度减轻了对金沙江上游叶巴滩、拉哇、巴塘、苏洼龙等在建水电站的灾害损失和后续影响,为类似灾害的处置提供借鉴经验。     

A test method for evaluating the thermal environment of underground coal mine refuge alternatives

Since 2009, the Mine Safety and Health Administration(MSHA) has required mines to install refuge alternatives(RAs) in underground coal mines. One of the biggest concerns with occupied RAs is the possible severity of the resulting thermal environment. In 30 CFR 7.504, the maximum allowable apparent temperature(AT) for an occupied RA is specified as 35 °C(95 °F). Manufacturers must conduct heat/humidity tests to demonstrate that their RAs meet the 35 °C(95 °F) AT limit. For these tests, heat input devices are used to input the metabolic heat of actual miners. A wide variety of test methods, sensors, and heat input devices could be used when conducting such tests. Since 2012, the National Institute for Occupational Safety and Health(NIOSH) has conducted over thirty 96-hour heat/humidity tests on four different RAs. This paper discusses the test equipment and procedures used during these investigations. This information is useful for RA manufacturers conducting RA heat/humidity tests, for other researchers investigating RA heat/humidity buildup, and for those who need to assess the thermal environment of any confined space where people may be trapped or are seeking refuge.     

正电子湮没研究Al、Nb共掺CaCu3Ti4O12陶瓷高介电常数机理

关于CaCu₃Ti₄O₁₂陶瓷的高介电常数机理，目前广泛接受的是非本征的内阻挡层电容模型。该模型认为在多晶中元素变价、缺陷和非化学计量比等导致的半导化晶粒被绝缘晶界层，即内阻挡层所包围。其中内阻挡层的厚度对材料的介电性能影响较大，而扫描电子显微镜（SEM）测试表明样品晶界呈稀烂的果酱状，SEM难以测量晶界区域绝缘内阻挡层厚度。本文采用正电子湮没技术表征其厚度，通过对CaCu₃Ti₄O₁₂陶瓷共掺不同浓度的Al、Nb（CaCu₃Ti_4-xAl_0.5xNb_0.5xO₁₂，x=0.2%、0.5%、5.0%）改变其晶粒和晶界的微观结构，研究CaCu₃Ti₄O₁₂陶瓷高介电常数机理。正电子湮没结果显示，掺杂样品符合多普勒展宽谱S参数的变化趋势与平均寿命的变化趋势一致。x=0.5%掺杂样品的介电常数最高，其平均寿命、S参数和湮没长寿命成分均最小，阻挡层最薄。实验结果验证了描述CaCu₃Ti₄O₁₂陶瓷高介电常数机理的内阻挡层电容模型的预测。     

Imaging the Curie Point isothermal surface and predicting its impact on the geothermal regime within the Nile Delta,Egypt

The available aeromagnetic data together with information from some available wells have been used in the current study to shed the light on the geothermal setup of the Nile Delta Province. The aeromagnetic data was reduced-to-pole and critically analyzed using the Spectral Analysis Technique through the Fast Fourier Transform (FFT), to determine the expected depths to the Basement and Curie Point (CPD) surfaces. The geothermal gradient between CPD and earth's surface was estimated, and accordingly the heat flow was evaluated using the proposed thermal conductivity. Then, the Basement Surface Temperature (BST) was estimated, by which the geothermal gradient and heat flow for the igneous-rocky basement and sedimentary-rocky horizon was independently predicted. By which, it could be possible to distinguish between the heat flow contribution from each horizon separately.     

Ta含量对NiCoCrAlY涂层性能的影响

采用真空雾化的方法制备了Ta含量为0、2%及5%的NiCoCrAlYTa合金粉末,利用超音速火焰喷涂制备了三种涂层,研究了Ta对合金粉末微观组织及物相的影响,绘制了1050℃条件下涂层的高温氧化动力学曲线,研究了500h氧化试验后涂层组织和β相的分布,初步探讨了Ta元素对改善涂层抗氧化性能的作用机理。研究结果表明:Ta通过提高MCrAlY体系抗氧化元素的溶质浓度,促进了氧化膜的形成,随着Ta含量的增加,涂层的内氧化程度降低,涂层抗氧化性能提高。但含Ta涂层在长时间氧化条件下会生成CrTaO_4、AlTaO_4等尖晶石类氧化物,且Ta的氧化物PBR值较大,对涂层的抗热震性能不利。     

Temperature influence on the development of interdiffusion phenomena in MCrAlY-coated nickel-based superalloys

In this work, the interdiffusion between a MCrAlY-bond coat and two different nickel-based superalloys is evaluated at three temperatures, 950 °C, 980 °C, and 1,050 °C. Of primary interest is the evolution of Kirkendall-porosity, the β-depleted zone in the bond coat and the β’- depleted zone in the superalloy. The three phenomena arise near the interface between bond coat and superalloy as a result of interdiffusion between both materials and are detrimental to the coating-substrate system. The evolution of the interdiffusion phenomena is highly dependent on the alloy composition of the materials as well as the annealing temperature. It has been found that not only the temperature dependency of the diffusion coefficient but also the temperature dependent element activities are an important factor when evaluating the interdiffusion phenomena. It has further been shown that at lower temperatures the amount of Kirkendall-porosity per volume fraction is higher than at higher temperatures, even though the overall amount of porosity is lower. Different equilibrium concentrations of main alloying elements and a correspondingly lower over-saturation of vacancies have been identified as the main explanation.